Need help?Do you have a question about the Austroflamm Integra II and is the answer not in the manual?
General| Brand | Austroflamm |
|---|---|
| Model | Integra II |
| Category | Indoor Fireplace |
| Language | English |
Introduction to Austroflamm, its history, and its position in the market.
Warnings about fuel types, flammable liquids, dust, soot, and general fire prevention.
Guidelines for electrical connections and safe disposal of hot ashes.
Precautions regarding hot surfaces, children, auger operation, and combustion air intake.
Details on independent testing and safety listing by OMNI Labs.
Diagram and list identifying components of the main control board.
Illustration of the Integra pellet stove system components.
Comprehensive list of parts with corresponding figures and numbers.
Measurements of the stove and available shroud sizes.
Key technical specifications including heating capacity, fuel consumption, and power.
How the stove operates and resumes functions after a power interruption.
Explanation of safety switches that shut down the stove due to temperature extremes.
Safety mechanism that stops the auger motor when the hopper lid is open.
Recommendations for authorized installers, local regulations, and general precautions.
Guidelines for designing the exhaust system, including vent connections and placement.
Requirements for electrical hookup and considerations for combustion air supply.
Information on installing the stove in various fireplace types and combustible frameworks.
Diagrams and instructions for connecting the stove to an existing chimney system.
Criteria for choosing between 3-inch and 4-inch exhaust pipe diameter based on altitude.
Austroflamm's dedication to research, development, and environmentally friendly technology.
Explanation of pellet heating benefits, including the CO2 cycle and recycling.
Information on Pellet Fuel Institute standards, premium vs. standard grade pellets.
The impact of ash content on cleaning frequency and fuel quality recommendations.
Guidance on proper pellet storage and an explanation of clinkering.
Essential checks before operation and an overview of the internal control unit.
Steps for the first startup and how to operate the stove in manual mode.
Instructions for programming timed heating cycles for automatic operation.
Detailed guide for setting heat intensity and daily time schedules in Time Mode.
General advice on cleaning frequency, fuel impact, and using the poker tool.
Procedures for daily cleaning of the burn pot and heat exchanger.
Instructions for cleaning the ash tray, glass, heat exchanger outlets, and rear ash chamber.
Maintenance procedures for the flue connection and air sensor, performed semi-annually.
Diagnosing and resolving problems related to flame quality, pellet feeding, and automatic shutdowns.
Troubleshooting issues with the fan not running or soot appearing outside the stove.
Understanding and responding to error messages displayed on the user board.
Definitions of abbreviations related to stove operation modes (SB, ON, TM, etc.).
Definitions of abbreviations for control functions and settings (PS, PE, CL, H/M/D, etc.).
Details on what is covered, components excluded, and limitations of the warranty.
Procedures for submitting warranty claims and registering the product for coverage.
To Next Page
