Autel MaxiTPMS TS508 - Position Relearn

38
One sensor is detected.
The programming function
automatically proceeds.
Programming succeeded.
Sensor ID, PSN, Pressure,
Temperature, Frequency and
Voltage are displayed on the
screen.
Programming Failed.
Press any key to continue.
By using Copy by Activation, the sensor ID that is retrieved from activated
sensor is programmed to the new MX-Sensor. Because the ID of the original
sensor and the new MX-Sensor are the same and the ID is already registered
to the vehicle ECU, there is no need to perform the Relearn function when
the new programmed sensor has been attached to the same wheel.