Autel MaxiTPMS TS508 - Latest Test; Review Data; My Device

55
fob to test. If the button works and the key fob is sending a signal, the
tool will beep and the screen displays as below. If the button does not
work, the tool will do nothing. To make sure each button is working
properly, please test each button in turn.
Figure 5-3 Sample Receive Signal Screen
 The progress bar indicates the approximate signal strength of the
key fob.
 The stronger the signal, the higher the beep tone.
 The tool tests only 315MHz and 433MHz key fobs.
4. Select Unlock ECU (just support Toyota), and follow the onscreen
instructions to unlock the ECU on Toyota vehicles.
Latest Test
The Latest Test function saves the route of the last test. User can select this
function to quick access the last test record and proceed testing.
Review Data
The Review Data function enables users to view and print saved TPMS
DTCs and the tire type and pressure information.
My Device
The My Device function enables users to update the software, view or
change device settings and view software and hardware versions.