OBD Relearn
The OBD Relearn function allows the TS508 to directly write the TPMS
sensor IDs to the TPMS module.
To perform Relearn, activate sensors on FL, FR, RR and RL wheels.
If there is sensor triggered, the tool
will ask whether to clear the saved
data, press N to use the saved data
and reactivate one sensor, the tool
will instruct you to connect OBD
cable and then perform OBD
Relearn; or press Y to clear the data
and display the Relearn Procedure.
The Relearn Procedure displays
when no sensor is triggered.
To Next Page
Loading...
