66
Windows-based computer with USB ports
USB cable
The Print Data function allows printing of TPMS DTC recorded data.
Connect tool Windows computer with the supplied USB cable.
1. Download the Maxi PC Suite from www.maxitpms.com > Product >
MaxiTPMS TS508 > Downloads, or from www.maxitpms.com >
Support > Freshdesk > Firmware & Downloads > MaxiTPMS TS508,
and install it to your Windows-based computer.
2. Connect the tool to the computer with the supplied USB cable.
3. Run Autel Printer software on computer.
4. Select Review Data function in Main Screen of the TPMS tool. In data
menu screen, use the UP/DOWN scroll button to select the data you
want to print. Wait for the reviewing window to display, and then select
Print function by pressing the Y button. The selected file will be uploaded
to your computer. For more detailed instructions, please refer to Review
Data on page 55.
5. The Printer will display as below.
Figure 5-19 Sample Printer Screen
6. The selected data will display on the textbox. Select the appropriate
function key on the right to execute one of the following operations:
Print – print all data in the textbox to a printer connected to your
computer.
Edit – display an editable NOTEPAD window with recorded data.
Copy – copy data in the textbox to the clipboard.
Clear – delete data in the textbox.
To Next Page
Loading...
