Autool BT360 User Manual

AUTOOL Autool BT360 Battery System Tester
9
NOTE: For REMOTE test, there will be a little tolerance. For any
doubt, take off the battery and select "OUT-OF-VEHICLE" to re-test.
3.4.4 Battery System Standard and Rating
BT-360 battery tester will test each battery according to the selected
system and rating.
Use UP/DOWN key to select according to the actual system
standard and rating marked on the battery. Use UP/DOWN key to
select according to the actual system standard and rating marked on
the battery. See in the below picture, the arrow indicated location.
CCA: Cold Cranking Amps, specified by SAE&BCI, most frequently
used value for starting battery at 0°F (-18°C).
JIS： Japan Industrial Standard, displayed on the battery as combination of
the numbers and letters, e.g. 55D23,80D26.
DIN ： German Auto Industry Committee Standard
IEC： Internal Electro technical Commission Standard
EN： European Automobile Industry Association Standard
SAE: Society of Automotive Engineers Standard
GB： China National Standard
There are other features : BCI, MCA , CA

Autool BT360 Specifications

General

Brand	Autool
Model	BT360
Category	Test Equipment
Language	English