Autool BT360 - Language Selection; Battery Test Procedure

AUTOOL Autool BT360 Battery System Tester
5
voltmeter is ON) refer to figure 1.
Figure 1. Startup Interface with Voltmeter on
At the middle bottom of the startup interface, it displays the
voltmeter value, which can be used as DC voltmeter. DC Voltmeter
test range is 8-30DCV, out of which will damage the tester.
3.3 Select Language
Press UP/DOWN key to select the Language,Include English,
Franch, germany,spanlish,etc.
3.4 Battery Test
After entering battery test program, tester displays the tester model
and version approx. 2 seconds, see figure 3.