Autool BT360 User Manual

AUTOOL Autool BT360 Battery System Tester
7
Now the tester detects the surface charge has been eliminated, turn
lights off as prompted, then press OK key. The tester will recover
automatic test
OUT-OF-VEHICLE means battery is not connected with any of the
vehicle loaded, i.e. battery connection is cut off.
3.4.2 Select Battery Charge State
After selecting the battery location, tester will prompt to select the
battery charge state, i.e. Before Charge or After Charge.
Press UP/DOWN key to select battery charge state, then press OK
key to confirm. In this way, it ensures a more accurate test result.
In Vehicle, select Before Charge for Cold Vehicle and After Charge
for Hot Vehicle.
3.4.3 Select Battery Type
After the battery charge status selected, tester will prompt to select
battery type, i.e. Regular Flooded, AGM Flat Plate or AGM Spiral,
and Gel battery. Press UP/DOWN key to select battery type, then
press OK key to confirm.

Autool BT360 Specifications

General

Brand	Autool
Model	BT360
Category	Test Equipment
Language	English