EasyManua.ls Logo

Autool BT360 - Cranking Test Procedure

Autool BT360
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AUTOOL Autool BT360 Battery System Tester
13
return to the startup interface.
After testing: if it's "IN-VEHICLE" test state, press OK key will bring
to Cranking Test.
3.5 Cranking Test
Tester prompts as following:
Starting the engine as prompted, tester will automatically complete
the cranking test and display the result.
Normally, cranking voltage value lower than 9.6V is regarded as
abnormal and it is OK if it is higher than 9.6V.
Test result of the tester includes actual cranking voltage and actual
cranking time.
When cranking test is abnormal, battery test result will also be
displayed at the same time.

Other manuals for Autool BT360

Related product manuals