Key Functions
Dual View Display
When only one HDMI output port (either HDMI OUT1 or HDMI OUT2) is
attached to an HDMI display, the device supports Dual View Display,
that is, up to two video sources can be displayed on one single screen.
If two video sources are being played in Dual View Display mode on
the display screen of HDMI OUT1/HDMI OUT2, connect an additional
video source to the device, this latest input source will replace the
source that displays longer on the screen.
Automatic Signal Switching
The device supports automatic signal switching function, allowing you
to output desired sources easily and quickly. This function follows
Last-In-First-Out rule:
1. When only one video source is connected to the device, HDMI
OUT 1 and/or HDMI OUT 2 automatically output this video source
to the display screens.
2. When a video source is to be input in the case that two video
sources are being played in dual view on one display screen, this
latest input source will replace either of the sources and display
on the screen. More information, see the switching mechanism in
Dual View Display section.
3. When no active video source is being input to the device, the
output display shows the Guide Screen image finally.
To Next Page