AV Access eShare W80 - Guide Screen

Key Functions
www.avaccess.com
11
info@avaccess.com
Guide Screen
The device outputs Guide Screen image when no active video source
is detected. The Guide Screen can be personalized to convey
customized connection instructions through the device’s Web UI
page.
IP: 172.16.18.20
SSID PWD: 12345678
No Access Code
Device/SSID: eShare W80
Figure 1-- Guide Screen Image
The Guide Screen image appears automatically on the display screen
in a period of time after all video sources are removed from the device.
Note:
• This Guide Screen image can be changed though Web UI, for more
information, refer to Guide Screen Change section.
• By default, if the device has been output Guide Screen image for
60 seconds, a 60-second countdown appears on the Guide Screen.
When the countdown is over, the connected display will enter
standby mode if it is CEC-capable.