- 21 -
4.1 Overview
The BIOS Setup program, or BIOS Setup for short, is located, together with the setup parameters, in a
FLASH block on the motherboard. Change the setup parameters of the device in the BIOS Setup, e.g.
system time or boot sequence.
Your device configuration is preset for operating with the included software. You should only change
the default setup parameters if technical modifications to your device require different parameters.
4.1.1 Basic Knowledge Required
A solid background in personal computers and Microsoft operating systems is required to understand
this chapter.
4.2 Entering the BIOS Selection Menu
4.2.1 Procedure
Step 1: Switch on or restart the device.
Step 2: Immediately press the “F2” button and keep it pressed after switching on the device.
4.3 BIOS Setup (SCU)
4.3.1 Structure of the BIOS Setup Menu
The individual setup parameters are distributed between different menus and submenus. Not all
menus are included in each supplied device configuration. The following table shows the menus.
Menu Meaning
Main Display system information, for example, BIOS version, processor and memory
Security Security functions, e.g., setting a password
Boot Determine boot options, e.g., boot order or USB boot
To Next Page
Loading...
