Document No. 10-300090, Issue 1 7-9
DVMRP
ip dvmrp remote-tunnel-address
Command Mode Interface Configuration.
Description Configures the DVMRP remote-tunnel-address on an interface. The no
form of this command restores the default, which is: no defined address.
Syntax
Sample Output The following example configures the DVMRP remote tunnel address on
interface 199.162.99.61.
(configure if:1)# ip dvmrp remote-tunnel-address
199.162.99.61
Systems P550R, P580, P880, and P882.
To Configure: ip dvmrp remote-tunnel-address <ip-addr>
To Restore
Default:
[no] ip dvmrp remote-tunnel-address
Table 7-7. Parameters, Keywords, Arguments
Name Definition
<ip-addr> Unicast Network IP address of the DVMRP capable router
designated to be DVMRP tunnel end point.
To Next Page
Loading...
