Document No. 10-300090, Issue 1 4-9
Buffering
set buffering port (pri-threshold)
Command Mode Global Configuration.
Description Sets the output buffer priority threshold for a physical port. The default
setting is 4.
Syntax set buffering port <mod-port-spec> output pri-threshold {1 | 2 | 3 | 4 | 5 | 6 |
7 | all-frames-normal-priority}
Sample Output The following example sets the output buffer priority threshold for physical
port 4/1 to 5.
(configure)# set buffering port 4/1 output pri-threshold 5
Systems P550R, P580, P880, and P882.
Table 4-8. Parameters, Keywords, Arguments
Name Definition
<mod-port-spec> Specifies the module and the port.
output The output buffer.
pri-threshold The priority thresholds are: 1, 2, 3, 4, 5, 6, 7 or all-frames-
normal-priority.
To Next Page
Loading...
