Document No. 10-300090, Issue 1 32-11
User Interface
help
Command Mode User.
Description Displays a list of commands that are available in the current command
mode and a brief description of each command.
Syntax help
Sample Output This example displays the commands that are available in User mode.
> help
dir [<filename>]
Displays the list of files in NVRAM, or a specific
filename
enable
Enter privileged mode
exit
Exit current mode and re-enter previous mode
help
Display full help list of all commands available
in the current mode
ip mtrace
no ip mtrace
enable/disable mtrace globally.
legacy-cli
Enter Legacy CLI Mode
.
.
Systems P550R, P580, P880, and P882.
To Next Page
Loading...
Need help?
General