Document No. 10-300090, Issue 1 12-11
IP-RIP
output-delay
Command Mode RIP Router Configuration.
Description Specifies the interpacket delay for RIP updates. The no form of this
command removes a delay definition. The default delay time is 1 second.
Syntax
Sample Output
The following example sets the interpacket delay for RIP updates to 10
seconds.
(configure router:rip)# output-delay 10
Systems P550R, P580, P880, and P882.
To Configure: output-delay <delay>
To Disable: no output-delay
Table 12-9. Parameters, Keywords, Arguments
Name Definition
<delay> The delay between packets in a multiple-packet RIP update. The
range is 0 to 50 seconds.
To Next Page
Loading...
