Document No. 10-300090, Issue 1 21-19
Port
set port huntgroup
Command Mode Global Configuration.
Description Sets or clears the huntgroup assignment for a specified switch port.
Syntax
Sample Output
The following example sets the huntgroup assignment of switch port 1 on
the module in slot 5 to huntgroup named sales.
(configure)# set port huntgroup 5/1 huntgroup_sales
Port huntgroup set: 5/1.
The following example clears the huntgroup assignments for all switch
ports on the module in slot 3.
(configure)# clear port huntgroup 3
P
ort huntgroup cleared: 3/1,3/2.
Systems P550R, P580, P880, and P882.
To Configure: set port huntgroup {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}]
<huntgroup-name>
To Clear: clear port huntgroup {<mod-num> | <mod-swport-
range>}[...,{<mod-num> | <mod-swport-range>}]
Table 21-17. Parameters, Keywords, Arguments
Name Definition
<mod-num> Specifies the number of the module in chassis, which, if
specified alone, sets or clears the huntgroup assignment of
every switch port on the module.
<mod-swport-
range>
Specifies a switch port or a range of switch ports whose hunt
group assignments are set or cleared.
<huntgroup-
name>
Specifies the name of a defined huntgroup.
To Next Page
Loading...
Need help?
General