Chapter 19
19-14 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip ospf auto-vlink-create
Command Mode Global Configuration.
Description Enables the automatic creation of virtual links. Use the no form of this
command to disable this behavior.
Syntax
Sample Output The following command enables the automatic creation of virtual links.
(config-if:intf3)# ip ospf auto-vlink-create
Systems P550R, P580, P880, and P882.
To Enable: ip ospf auto-vlink-create
To Disable: [no] ip ospf auto-vlink-create
To Next Page
Loading...
