Chapter 21
21-44 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set port vlan-binding-method
Command Mode Global Configuration.
Description Sets VLAN binding method for a specified switch port or all switch ports on
a specified module.
Syntax set port vlan-binding-method {<mod-num> | <mod-swport-range>}
[...,{<mod-num> | <mod-swport-range>}] {bind-to-all | bind-to-received |
static}
Sample Output The following example sets the VLAN binding to bind-to-all.
(configure)# set port vlan-binding-method 3/1 bind-to-all
Port vlan-binding-method set: 3/1
Systems P550R, P580, P880, and P882.
Table 21-38. Parameters, Keywords, Arguments
Name Definition
<mod-num> Specifies a module number. If a module number is specified,
the VLAN binding method is set for all ports on the module.
<mod-swport-
range>
Specifies a switch port or a range of switch ports on which to
set the VLAN binding method.
bind-to-all Binds the port to all VLANs known to the switch.
bind-to-received Binds this port to any VLAN it receives traffic from.
static Assigns VLAN membership manually, using the VLAN
switch ports.
To Next Page
Loading...
