Chapter 30
30-4 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
boot system flash
Command Mode Global Configuration.
Description Specifies which system image the switch loads at startup. Configures the
image to boot from the FEPROM. The no form of this command restores
the default system flash setting (app1).
Syntax boot system flash {app1 | app2 | cardapp1 | cardapp2}
Sample Output The following example sets the system image that the switch loads at
startup to cardapp2 on the pcmcia.
(configure)# boot system flash cardapp2
Boot flag set to ’cardapp2’.
Systems P580 and P882.
Table 30-1. Parameters, Keywords, Arguments
Name Definition
app1 | app2 Choose app1 or app2.
cardapp1 | cardapp2 Choose cardapp1 or cardapp2.
To Next Page
Loading...
