Avaya 1120E - Configuring Do Not Disturb; Enable Do Not Disturb

Configuring Do Not Disturb
Use Do Not Disturb to automatically block all incoming calls. When you activate this feature,
the calling party receives a busy signal.
Enable Do Not Disturb
To enable Do Not Disturb:
1. Press the DND context-sensitive soft key on the idle
display (press the More… context-sensitive soft key
until DND appears).
2. Choose one of the following:
• Press the Enable context-sensitive soft key to
configure the IP Deskphone to Do Not Disturb.
• Press the Back context-sensitive soft key to return to
the previous menu.
3. Press the Ok context-sensitive soft key to return to
the Services menu.
Disable Do Not Disturb
To disable Do Not Disturb:
1. Choose one of the following:
• Press the Disable context-sensitive soft key to
configure Do Not Disturb.
Configuring Do Not Disturb
Avaya 1120E IP Deskphone with SIP Software User Guide November 2013 203