Avaya 1120E - Page 57

If Authentication is enabled by your system administration, you can enter your authentication
ID independent of your user ID. The authentication ID is used when the server challenges the
IP Deskphone.
To logon to the IP Deskphone:
1. Press the abc/123 context-sensitive soft key to
toggle between alphabetic or numeric input.
2. Use the dialpad to enter your user ID login at the
prompt.
Note:
Use the left navigation key to backspace and
remove a previous user ID.
3. Press the Login context-sensitive soft key.
If Authentication is enabled by your system
administration, you are presented with the
Authentication ID screen. The authentication ID is
autofilled with your user ID.
If Authentication is not enabled, a new screen
appears and prompts you for your password:
• Press the abc/123 context-sensitive soft key to
toggle between alphanumeric or numeric input.
• Use the dialpad to enter your authentication ID
login at the prompt.
• Press the Login context-sensitive soft key.
Logging on
Avaya 1120E IP Deskphone with SIP Software User Guide November 2013 57