Operating your Avaya 1210 IP Deskphone
106
Using Radio Page
Use the Radio Page feature to page a user and stay on the line until the
called party answers. The paged user answers the call after entering a
special Page Meet-Me code from any IP Deskphone.
Using Automatic Preselection (Meet-Me page)
Perform the following procedure to use Automatic Preselection.
2. Dial the Page Trunk Access Code to
complete the connection to the page
system.
3. Make your announcement.
4. Press the Goodbye key
.
1. Lift the handset.
2. Dial the Radio Paging Access FFC.
You hear the paging tone (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page.
After dialing, you hear the ringback tone.
The paged party can use any IP
Deskphone to enter a Radio Paging
Answer FFC and their own DN number.
(Goodbye)
To Next Page
Loading...
