Operating your Avaya 1210 IP Deskphone
88
Using Call Park
Use the Call Park feature to hold (park) your active call temporarily and
retrieve a call from any IP Deskphone. Using Call Park does not tie up a
line.
Parking a call on the System Park DN
To park a call on the System Park DN or your own DN, perform the
following procedure.
Parking a call on a DN (Not System Park DN or own DN)
To park a call on a DN (Not System Park DN or own DN), perform the
following procedure.
4. Press the Goodbye key.
The caller connects to the attendant.
1. During an active call, press the Park soft
key twice.
The call is parked on your DN.
Note: Enabling System Park DN
automatically parks the calls on the
system park DN.
1. Press the Park soft key.
2. Dial the DN on which to park the call.
(Goodbye)
Park
Park
To Next Page
Loading...
