Figure 28: Configure VLAN at RADIUS
Getting correct RADIUS server settings
This section provides troubleshooting guidelines to obtain the correct RADIUS server
settings.
1. Obtain network information from Planning and Engineering documentation to locate
server information.
2. Obtain network information for the RADIUS server.
Viewing RADIUS information
Obtain the radius information to identify its settings.
Use vendor documentation to obtain settings display.
Configuring RADIUS
Configure the RADIUS server with the correct VLAN information.
Use vendor documentation to make the required changes.
Troubleshooting authentication
72 Troubleshooting March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
