Configure switch
Correct the switch configuration to correct the issue with RADIUS MAC.
Task flow Configure switch
The following task flow assists you to configure the ERS 3500 Series device to correct the
RADIUS MAC issue.
Figure 33: Configure switch
Displaying EAPOL port
Review the EAPOL port information.
1. Enter the show eapol port <port#> command to display the information.
2. Ensure that global EAP is enabled and port is eap-auto.
Troubleshooting authentication
80 Troubleshooting March 2013
Comments? infodev@avaya.com
To Next Page
Loading...
