Ensuring MAC in the list
Add the MAC address to the list if it was omitted.
1. Use the show eapol multihost non-eap-mac status command to view
MAC addresses.
2. Use the eapol multihost non-eap-mac <H.H.H> <port> command to add
a MAC address to the list.
Non-EAP RADIUS MAC not authenticating
Correct a non-EAP RADIUS MAC that is not authenticating.
Work flow Non-EAP RADIUS MAC not authenticating
The following work flow assists you to determine the cause of and solution for a RADIUS MAC
that does not authenticate.
Figure 32: Non-EAP RADIUS MAC not authenticating
Non-EAP RADIUS MAC not authenticating
Troubleshooting March 2013 79
To Next Page
Loading...
