Non-EAP MHSA MAC is not authenticating
Ensure that the switch is configured correctly.
Work flow Non-EAP MHSA MAC is not authenticating
The following work flow assists you to determine the solution for an MHSA MAC that is not
authenticating.
Figure 35: Non-EAP MHSA MAC is not authenticating
Configure switch
Configure the switch to enable MHSA.
Task flow Configure switch
The following task flow assists you to enable MHSA on the ERS 3500 Series device.
Non-EAP MHSA MAC is not authenticating
Troubleshooting March 2013 83
To Next Page
Loading...
