84 Avaya 3641/3645/6120/6140 IP Wireless Handset SIP Administration Guide June 2012
111111 – the last three octets of the on-air MAC address for a discovered AP.
22 – the signal strength for the specified AP.
33 – the channel number of the specified AP.
444 – the beacon interval configured on the specified AP.
Any/MyID – softkey to toggle between “single SSID” and “any SSID” mode.
Detl/Smry – softkey to toggle between the multiple AP (summary) display, and the
single (detail) displays for each AP.
The following screen shows how the display would look when there are three APs
configured with an SSID that matches that of the handset. The first has a signal strength
of –28 dBm, is configured on channel 2, with a beacon interval of 100 ms. The second
has a signal strength of –48 dBm, is configured on channel 6, with a beacon interval of
200 ms. The third has a signal strength of –56 dBm, is configured on channel 11 with a
beacon interval of 100 ms.
a b 7 b c8 - 28 02 1 00
2 a e 5 78 - 48 06 2 00
2 a e 5 96 - 56 11 1 00
A n y Det l
When the Any SSID mode is selected, the summary display contains the first six
characters of the APs SSID instead of the beacon interval as in the example below.
a b 7 b - 2 8 0 2 A L P H A
2 a e 5 - 4 8 0 6 W S M T E S
2 a e 5 - 5 6 1 1 v o i c e
M y I D Det l
In Detl (detail) mode the display would appear as follows. The left/right arrow keys will
move between AP indices.
i : b b b b b b s n c h b c n
e e e e e e e e e e e D G H I
r r r r r r r R r r r r r + x x x x
Q : X P C: vC ssss ss s
A n y Smry
Where:
i – index of selected AP (value will be from 0 to 3 inclusive)
bbbbbb – the last three octets of the BSSID for a discovered AP
To Next Page
Loading...
