Avaya C360 Installation And Configuration

Avaya C360 Layer 3 Features
162 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
IP Configuration
IP Configuration CLI Commands
In order to... Use the following command...
Enable IP routing ip routing
Set ICMP error messages ip icmp-errors
Specify the format of netmasks
in the show command output
ip netmask-format
Create and/or enter the
Interface Configuration Mode
interface
Assign an IP address and mask
to an interface
ip address
Set the administrative state of
an IP interface
ip admin-state
Update the interface broadcast
address
ip broadcast-address
Define a default gateway
(router)
ip default-gateway
Define the interface RIP route
metric value
default-metric
Enable net-directed broadcast
forwarding
ip directed-broadcast
Set the IP routing mode of the
interface
ip routing-mode
Enable or disable the sending of
redirect messages on the
interface
ip redirect
Check host reachability and
network connectivity
ping
Trace route utility traceroute
Create a router Layer 2 interface set vlan (Layer 3)
1 of 2

Avaya C360 Specifications

General

Brand	Avaya
Model	C360
Category	Switch
Language	English