Procedure: Software Installation
Issue 6 September 2001
2-17
Display Language Enter the language that should be displayed. The options are
English, French, Italian, Spanish, and user defined. The default is
English.
NOTE: Local phone functions are provided in English.
IPEI Enter the 9-digit string obtained from the WT. The International
Portable Equipment Identity (IPEI) is a unique number used to
identify a WT for administration and through-the-air
communication. Each phone has a unique IPEI assigned at the
factory. This IPEI can be obtained via a soft key button sequence
or from the label on the back of the phone. See the “Procedure: WT
Key Sequence to Obtain the IPEI” section in Chapter 3 of this
document. The IPEI that is entered on the Station form must match
the IPEI that was assigned to the WT at the factory.
Access Code Enter the 5-digit decimal security code assigned to the WT. The
access code is assigned by the administrator and must be entered
on the Station form. This is a customer-defined number that does
not have to be unique among all phones. The administrator could
conceivably use a single access code for all phones.
Home Enter y if this is the primary location for WT use. Enter n if this is the
secondary location for WT use. The default is y.
Table 2-2. Station Form Fields (Page 1) (continued)
Field Name Explanation
To Next Page
Loading...
Need help?
General
