Hardware Installation
3-36 Issue 6 September 2001
Procedure: Installing 559B/C Outdoor CAUs
The following figure shows a 559C Outdoor CAU.
Figure 3-18. 559C Outdoor CAU
To install a 559B or 559C Outdoor CAU, do the following:
!
WARNING:
The installation of outdoor CAUs for the DWBS must conform to the local
electrical code for grounding.
1. Mount the outdoor CAU in the location specified by the installation map.
Specifically, do the following:
NOTE:
Ensure that you mount the CAU vertically.
a. Verify that there is a flat, structurally sound mounting surface at the
specified location. If such a surface is not available, the customer
must provide one.
To Next Page
Loading...
Need help?
General
