Preparing a G430 with an S8300 Server
Issue 1 May 2009 25
Avaya - Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy.
DRAFT - January 25, 2009 - 1:38 PM
9. On the Phone Message Files screen, you can install standard and custom phone message files.
10. On the Media Server - IP Addresses screen, enter IP information for the S8300.
11. If you selected the Install this media server as an LSP option in the Usage Options screen, the
LSP Controller screen appears. Enter the primary controller IP addresses for registration and
synchronization.
12. You can configure optional services: Uninterruptible Power Supply (UPS), Domain Name Service
(DNS), Network Time Protocol (NTP), or INADS remote support.
13. If you are not using IW to generate basic translations, select the Translation will be added after the
installation option on the Translation Source screen.
14. On the Security File screen, load the CM License file that you prepared from your laptop.
15. On the IP Addresses screen, click to configure the following information for the G430:
a. To specify the details of the Primary Management Interface of the G430, use the PMI screen.
b. To specify SNMP community strings and trap destinations, use the SNMP screens.
c. To specify the Media Gateway Controller(s) used to manage the G430 and the Transition Point
information, use the MGC List screen. Click Ping Test to test the accessibility of each MGC.
16. On the Firmware screen, upgrade G430 and media module firmware. New firmware files can be
loaded from your laptop directly into the server /tftpboot directory, if needed.
17. Use the Change Master Key - Optional screen to optionally change the master key which is used to
encrypt gateway secrets (passwords, etc.) in the gateway configuration file.
18. If you have a service contract, the Gateway Authentication screen displays the installed gateway
Authentication file.
19. Review the status of the Field Replaceable Units (FRU) in the
FRU Status screen.
20. On the TFTP Server screen, configure the media gateway TFTP server capability to upload IP Phone
configuration files.
21. You can configure the modem in the modem configuration screens.
22.
If you selected the option Use this wizard to create basic translations in the Translation Source
screen, you can configure Telephony, Trunking, and Endpoints.
23. Optionally configure alarming for the modem, OSS alarming, and SNMP alarming.
24. Optionally change the root password on the media gateway.
25. On the Authentication File screen, load the CM authentication file that you prepared from your laptop.
Preparing the G430 with an S8300 for a remote configuration
If you need to prepare the G430 with an S8300 for a remote configuration, you must attach and enable a
modem.
1. Connect a USB modem to one of the USB ports on the S8300 Server.
2. From the Integrated Management Main Menu, select Launch Maintenance Web Interface.
3. Enable the modem as follows:
To Next Page
