Product Description
IP Office 8.1
© 2012 AVAYA All rights reserved.
Page 37
Issue 26.k.- (16 August 2012)
Extension Copy can only be performed from an Attendant Extension in System Programming Mode or from the
Windows Manager PC application.
Dial Code Features
· ‘F’ represents the FEATURE button.
· ‘I’ represents the INTERCOM button.
· ‘XX’ represents a system extension number.
· ‘PP’ represents a Personal Speed Dial code.
· ‘G’ represents a single-digit group number.
· ‘LL’ represents a system line number.
Message Alert Notification
Voice Announce to Extension
Call Park to own Extension
Direct Inward Dialing (DID)
Use this feature to have Direct Inward Dialing (DID) numbers on a PRI / T1 or SIP line routed automatically to a
specific extension, hunt group, or calling group. When a Direct Inward Dialing (DID) call arrives, the system
"collects" the digits from the T1 service provider (that is, the number that was dialed) and matches the number
to a DID Mapping Table you created. If the incoming number matches an entry in the DID Mapping table, the
call rings at the matching extension or hunt group.