Product Description
IP Office 8.1
© 2012 AVAYA All rights reserved.
Page 65
Issue 26.k.- (16 August 2012)
Dial Code Features
· ‘F’ represents the FEATURE button.
· ‘I’ represents the INTERCOM button.
· ‘XX’ represents a system extension number.
· ‘PP’ represents a Personal Speed Dial code.
· ‘G’ represents a single-digit group number.
· ‘LL’ represents a system line number.
Direct Inward Dialing (DID)
Use this feature to have Direct Inward Dialing (DID) numbers on a PRI / T1 or SIP line routed automatically to a
specific extension, hunt group, or calling group. When a Direct Inward Dialing (DID) call arrives, the system
"collects" the digits from the T1 service provider (that is, the number that was dialed) and matches the number
to a DID Mapping Table you created. If the incoming number matches an entry in the DID Mapping table, the
call rings at the matching extension or hunt group.
Direct Inward Dialling (DID) to Auto Attendant
DID calls can be directed to and answered by any Automated Attendant.