Avaya J100 - Page 248

Parameter name Default
value
Description
ENABLE_MODIFY_CONTACTS Specifies if the list of contacts and
the function of the contacts
application can be modified on the
phone.
Value operation:
• 0: No
• 1: Yes
ENABLE_MULTIPLE_CONTACT_WARNING Specifies if a warning message
must be displayed if there are
multiple phones registered on a
user's behalf.
Value operation:
• 0: No
• 1: Yes
Note:
Multiple registered phones can
lead to service disruption.
ENABLE_OOD_MSG_TLS_ONLY 1 Specifies if an Out-Of-Dialog (OOD)
REFER must be received over TLS
transport to be accepted.
Value operation:
• 0: No, TLS is not required.
• 1: Yes, TLS is required.
Note:
A value of 0 is only intended
for testing purposes.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 248
Comments on this document? infodev@avaya.com