Avaya J100 - Page 249

Parameter name Default
value
Description
ENABLE_OPUS 1 Specifies if the OPUS codec
capability of the phone is enabled
or disabled.
Value operation:
• 0: Disabled.
• 1: Enabled OPUS wideband with
bitrate of 20KBps.
• 2: Enabled OPUS narrowband
with bitrate of 16KBps.
• 3: Eanbled OPUS narrowband
with bitrate of 12KBps.
Note:
Avaya J129 IP Phone does not
support third-party local call
conference with OPUS.
ENABLE_PHONE_LOCK 0 Specifies whether the Lock softkey
on the Idle phone screen and the
Lock feature button are enabled on
the phone. If enabled, a user can
manually lock the phone by
pressing the button or selecting the
feature.
Value operation:
• 0: Disabled. Lock softkey and
feature button are not displayed.
• 1: Enabled. Lock softkey and
feature button are displayed.
Note:
On Avaya J129 IP Phone, the
Lock option is in the Main
menu. There is no Lock
softkey or feature button.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 249
Comments on this document? infodev@avaya.com