Parameter name Default
value
Description
ENABLE_PPM_SOURCED_SIPPROXYSRVR
The parameter is only available in an Avaya Aura
®
environment.
1 Enables PPM as a source of SIP
proxy server information.
Value operation:
• 0: Proxy server information
received from PPM is not used.
• 1: Proxy server information
received from PPM is not used.
ENABLE_PRECEDENCE_SOFTKEY 1 Specifies that whether the
precedence soft key is enabled or
not on the idle line appearances on
Phone Screen.
Value operation:
• 0: Disabled.
• 1: Enabled.
ENABLE_PRESENCE 1 Specifies if presence will be
supported.
Value operation:
• 0: Disabled
• 1: Enabled
Note:
This parameter is set to 0 in IP
Office environment.
ENABLE_PUBLIC_CA_CERTS 1 Specifies whether the out-of-the-
box phone can validate server
certificates against a list of well-
known public Certificate Authority
certificates
Value operation:
• 0: Embedded public CA
certificates are only trusted when
TRUSTCERTS is empty.
• 1: Embedded public CA
certificates are always trusted.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 250
Comments on this document? infodev@avaya.com
To Next Page
Loading...
