Parameter name Default
value
Description
phone because of the number
of events generated.
LOCALLY_ENFORCE_PRIVACY_HEADER
The parameter is only available in an Avaya Aura
®
environment.
0 Specifies whether the phone
displays Restricted instead of
CallerId information when a Privacy
header is received in a SIP INVITE
message for an incoming call.
Value Operation:
• 0: Disabled. CallerID information
is displayed.
• 1: Enabled. Restricted is
displayed.
LOG_CATEGORY Null Specifies a list of categories of
events to be logged through syslog
and locally.
This parameter must be specified to
log events below the Error level.
The list can contain up to 255
characters.
Category names are separated by
commas without any intervening
spaces.
LOG_DIALED_DIGITS 1 Specifies if the call log will contain
digits dialed by a user or
information about a remote party
when the user dials a FAC code.
The FAC code is identified by * or #
entered as a first character.
Value Operation:
• 0: Allow dialed FAC code to be
replaced with a remote party
number in the call history
• 1: Dialed digits are logged in call
history exactly as they were
entered by the user (default).
LOGSRVR Null Specifies one address for a syslog
server in dotted-decimal formatl
(IPv4), colon-hex format (IPv6, if
supported), or DNS name format.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 233
Comments on this document? infodev@avaya.com
To Next Page
Loading...
