Avaya J129 - Page 234

Parameter name Default
value
Description
The value can contain 0 to 255
characters.
M
MATCHTYPE 0 Specifies how an incoming or
outgoing phone number is
compared with the contacts on the
phone to display the contact name.
0: Displays the contact name if all
the digits match.
1: Displays the contact name if all
the digits of the shorter number
match with the right-most digits of
the longer number. For example, a
5-digit extension number can be
matched with the 8-digit phone
number saved in the contacts.
2: Displays the contact name if
atleast the last four digits match. If
the contacts are saved in multiple
sources, for example, PPM,
Exchange, or locally, the contact
name saved first is displayed.
MAX_TRUSTCERTS 10 Specifies the maximum number of
trusted certificates files defined by
this parameter that can be
downloaded to the phone. Valid
values are from 1 to 10.
MEDIA_ADDR_MODE 4 Specifies the IP address of the
endpoint when both IPv4 and IPv6
addresses are provided. This
parameter is used for SIP
signalling.
Value operation:
• 4: IPv4
• 6: IPv6
• 46: Prefer IPv4 over IPv6
• 64: Prefer IPv6 over IPv4
MEDIA_NEG_PREFERENCE 0 Specifies the address family
preference used by a dual mode
answer in non-Avaya environment.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 234
Comments on this document? infodev@avaya.com