Avaya J139 - Page 20

Procedure
1. While on an active call, press Transfer.
The phone displays the Enter Transfer Destination screen.
2. Do one of the following and then press the Call soft key:
• Dial the number to which you want to transfer the call.
• Search for the number in the Contacts or Recents list.
3. To initiate a blind transfer, press Now.
The call transfer is complete.
BLF icons and visual LED indication
The following table displays the BLF state icons and LED indicators for the Avaya J100 Series IP
Phones.
State Phone icons Red LED for the line
key
Green LED for the line
key
Idle Off Off
Incoming call Off Blink
Outgoing call Blink Off
Active / hold On Off
Parked call Off Blink
Unavailable Off Off
Adding a Broadsoft BLF user
About this task
In the Broadsoft environment, you can add a new BLF monitored user by the common
customization process of adding a new line key on the Phone screen.
Note:
To add a BLF user in the Asterisk environment, contact your system administrator.
Before you begin
Ensure that your administrator enables the BLF feature for your extension.
Operations
February 2022 Quick Reference for Avaya J139 SIP IP Phone in Open SIP 20
Comments on this document? infodev@avaya.com