Telephone Stand
Your telephone can be placed in two positions, a lower position and an upright position. You
can adjust the display screen to different angles. To move the display screen, gently pull from
the top of the display screen towards you. As you pull the screen towards you, you will hear a
clicking sound. Each of these clicks is a locking position for the display screen. Gently push
on the display screen to adjust the screen to a previous position.
If your phone is in the upright position, reverse the tab located below the switchhook in the top
ear piece pocket (on the front of the phone). This will keep the handset seated in the correct
position. You will need a small screwdriver to lift this tab out.
Telephone Stand
Avaya one-X
™
Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide February 2009 9
To Next Page
Loading...
