© 2016 Avaya Inc. All rights reserved. NDA Confidential; use pursuant to your agreement.
Release Notes for Avaya Scopia® XT Series What’s New | 8
the support for certain XT devices at any time. Events beyond our control may affect
our service, such as force majeure events.
Pre-Provisioning an XT Endpoint
To define a pre-provisioning parameter for an endpoint, click on the Add button in the Avaya
Equinox® Management Endpoints tab, and chose Pre-Provisioning an Endpoint.
Figure 3: Add a Pre-Provisioned Endpoint
A Service Code corresponding to the pre-provisioned endpoint profile is generated.
You can then specify a set of basic/advanced settings for an endpoint.
Figure 4: Pre-provisioned Endpoint's Service Code
Once they are added, Pre-provisioned endpoints are marked with a blue "clock" icon in the Avaya
Equinox® Management list. This icon means that a profile is ready to be applied to an endpoint with
a certain Service Code, but the endpoint did not yet connect to receive the provisioning profile.
Figure 5: Pre-provisioned Endpoints Listed
To Next Page
Loading...
