© 2016 Avaya Inc. All rights reserved. NDA Confidential; use pursuant to your agreement.
Release Notes for Avaya Scopia® XT Series What’s New | 9
When the pre-provisioned XT Endpoint starts for the first time, you will be invited by a guided
procedure to choose the preferred language and then to enter your Service Code
Figure 6: XT Quick Setup Wizard Start
Figure 7: Insert the service code in the XT Quick Setup Wizard
Figure 1: Pre-configuration Found
If the service code is correct, the pre-provisioned name for your XT is shown and you can continue
the automatic configuration. If the service code is not correct or you do not accept the pre -
configuration, you can go back to previous step and proceed with a manual configuration.
Important
Once your endpoint has been successfully provisioned, the Avaya Equinox®
Management mode will be marked as “Cloud”
If your endpoint was already managed, the mode will be automatically upgraded to
“Cloud” when upgrading Avaya Equinox® Management to this solution version.
When managed in “Cloud mode”, the XT is connected using a secure web socket to
Avaya Equinox® Management for services like configuration, LDAP entries, software
upgrade, scheduling and meeting management (meeting roster and similar features).
To Next Page
Loading...
