T7208 Telephone User Guide Page 10
- Issue 01g (22 May 2011)IP Office
Administration Feature Codes
The following feature codes are used to edit phone settings. Some functions may request a security code after the feature
code is entered. When this occurs, enter your login code and press #.
· Button Inspect: Feature *0
After selecting this function, pressing any programmable button will display the function currently assigned to
that button.
· Auto Dial Button : Feature *1
This feature allows you to store a number against a programmable button. After entering the code, press the
button to be programmed and then enter the number that the button should dial.
· Internal Autodial (User Button) : Feature *2
This feature allow you to create a user button that matches another user's extension number. The button can then
be used to call the other user. The button can also be used to see the current state of the other user. The button's
icon will flash when the other user has a call alerting them. When that is the case, pressing the button answers
their call. When the icon is steady the user is busy.
· Ringer Sound : Feature *6
Adjust the ringer sound type. When selected, the number keys 1 to 4 are used to select the required ringer. The
volume can also be adjusted using the volume controls.
· Ring Volume : Feature *80
This feature code causes the phone's ringer to sound for a short period during which its volume can be adjusted
using the phone's volume controls.
44
64
62
62
58
58
To Next Page
Loading...
