Avaya T7208 - Contrast; Ringer Sound; Ringer Volume

T7208 Telephone User Guide Page 58
- Issue 01g (22 May 2011)IP Office
10. Phone Settings
10.1 Contrast
You can change the contrast on the phone display.
1.
Press Feature *7.
2.
Use the number keys to select the required contrast. Alternatively, use the and buttons to change the
contrast.
3.
The function will automatically cancel after a 3 seconds.
10.2 Ringer Sound
You can change the ringer sound. This does not change the ring pattern which is controlled by the telephone system.
1.
Press Feature *6.
2.
Press 1 to 4 to select the required ringer sound.
· Whilst the function is active, you can also use the and buttons to change the ringer volume.
3.
The function will automatically cancel after a 5 seconds.
10.3 Ringer Volume
You can change the ringer volume using the following process. You can also adjust the volume while a call is ringing your
phone.
1.
Press Feature *80. The phone will start a continuous ring.
2.
Use the soft and loud volume buttons to change the volume to the level required.
3.
The function will automatically cancel after a 5 seconds.