AVer CAM520 Pro3 - Flicker Decrease on Ifp;Monitor; Frequency; White Balance; Noise Reduction

To Next Page

To Previous Page

Flicker Decrease on IFP/Monitor

This is to ensure fluid content capture on IFP monitor

Select Setting > Image > Flicker Decrease on IFP / Monitor > Off or On.

[Note] While in WDR mode, flicker decrease function will be disabled.

Frequency

Select the frequency of the camera.

Select Setting > Image > Frequency > 50 HZ or 60 HZ.

White Balance

Select the white balance setting for various light conditions or color temperature.

Select Setting > Image > White Balance > Auto or Manual.

Noise Reduction

To reduce the noise from the signal.

Select Setting > Image > Noise Reduction > Off, Low, Middle, or High.

Related product manuals