AVer CAM520 Pro3 - Remote Control; Camera Control and SmartFrame

3
Remote Control
Name
Function
1. Camera Select
One remote control can control up to 3
AVer USB series cameras. You can
use AVer PTZApp 2 or IP web page to
set numbers associated with each
camera, and then select which camera
you would like to control using the
remote.
[Note] The default is Off. If you don’t
do any binding, no matter you press
camera 1 or 2, 3 button on the remote
control, you can control all the AVer
USB cameras around you.
2. Camera Directional
Control
Use the directional buttons on the
remote to control the direction of the
camera. Press the directional button to
move the camera or press and hold to
continuously pan or tilt.
3. SmartFrame
One-click automatic field of view
adjustment to fit all participants.
Press for 1~2 seconds to switch the
SmartFrame function among Manual
Frame / Auto Frame / Preset Framing /
Smart Composition. A message will
appear on the screen to indicate the
mode.
While in Auto Framing mode, or doing
one-click manual frame, an icon
message (as figure shown) will display
on the upper left screen to indicate
that the framing action is triggered.
The icon will appear 2~3 seconds on
the screen. Once the framing process
is done, it will disappear. If you don’t
want to see the icon display, please go
to PTZApp 2, find “On Screen Menu”