48
Time Correction Mode
Adjust time automatically or manually.
Select System > Time Correction Mode > Auto or Manual.
Auto: The system time will be set by NTP server on the network. Click the pencil icon of NTP
Server and enter the URL of NTP server. Select the Time Zone. Select NTP Update to save
setting. Select Confirm to start auto time adjustment.
[Note] Our default NTP server is located in the USA. If this does not work in your country,
please manually key in the desired NTP server.
Manual: User can set up time manually. Click the pencil icon and enter the Year, Month, Day,
Hour, and Minute. Select Confirm to save the settings.
To Next Page
Loading...
