50
PTZApp 2
In PTZApp 2, user can change the IP address setting of CAM520 Pro3, configure the parameters of
the camera, set up AI tracking functions and some advanced image settings, pan, tilt, and zoom the
camera.
Install PTZApp 2
Please go to https://www.aver.com/download-center (Headquarters and Europe) or
https://www.averusa.com/business/support/ (USA) to download the PTZApp 2. After downloading,
double-click on the file and follow the on-screen instructions to complete the installation.
After installing the PTZApp 2, double-click on the PTZApp 2 icon to run the application.
[Notes]
While installing PTZApp 2, if you refuse to install IP virtual streaming, Keystone Correction and Smart
Gallery plug-in in your PC (illustrated as below), you will not be able to use these functions. To enable
these functions, please reinstall PTZApp 2 for the necessary plug-in. Note: Keystone Correction and
Smart Gallery plug-in are not available now and would be updated in later release.
(Windows PC)
(MAC PC)
To Next Page
Loading...
